CNC Hexagonal Wire Mesh Machine
This image shows our horizontal gabion box making machine working inside. This image shows our horizontal gabion
This image shows our horizontal gabion
This image shows our horizontal gabion
Servo-driven automation. PLC touchscreen control.
The CNC hexagonal wire mesh machine (also referred to as a hexagonal wire netting machine) is YouTe’s highest-output steel wire model — a servo-driven platform with PLC automation built for producers running chicken wire, poultry netting, agricultural fencing, and industrial mesh at volume.
Where mechanical hexagonal machines require manual speed adjustment and offer only basic production monitoring, the CNC model’s PLC control system handles speed optimization, fault detection, and production counting automatically — reducing operator skill requirements and increasing per-shift output consistency.
Compatible with galvanized wire, PVC-coated wire, copper wire, and black annealed wire. Wire diameter 0.35 mm to 2.2 mm across the full range of standard and custom mesh apertures.
CNC Hexagonal Wire Mesh Machine — Full Specifications
All parameters are configurable to your production requirements. Wire diameter, mesh aperture, weaving width, and control system components are confirmed before production begins.
| Parameter | Specification |
|---|---|
| Wire material | Galvanized, PVC-coated, copper wire, black annealed wire |
| Wire diameter range | 0.35 – 2.2 mm |
| Mesh aperture | 13 mm (1/2″), 16 mm, 20 mm (3/4″), 25 mm (1″), 40 mm, 50 mm (2″), 75 mm (3″); custom on request |
| Max weaving width | Up to 4,000 mm |
| Working speed | 60 – 100 cycles/min (varies by wire diameter and aperture) |
| Maximum output | Up to 150 m²/h |
| Drive system | Servo motor + PLC |
| Control interface | PLC touchscreen |
| Operating noise | Below 75 dB at full production speed |
| Motor power | Configuration-dependent; confirm at inquiry |
| Voltage | 220V / 380V / 400V / 415V / 480V — 50Hz or 60Hz, 3-phase |
| Auto pause system | Included — wire break detection |
| Production counter | Included |
| Fault alarm | Included |
Mesh aperture is fixed at manufacture. If your production requires multiple aperture sizes, specify each at order — or plan for separate machines per specification.
CNC Hexagonal Wire Netting Machine — Production Footage
This footage shows the CNC hexagonal wire netting machine completing a full automated production cycle — wire feed from spool rack, synchronized twisting across the full weaving width, and continuous mesh panel output at operating speed.
Why Choose YouTe CNC Hexagonal Wire Mesh Machine
Servo Drive vs Gear Drive — Why It Matters for Mesh Quality
Most entry-level hexagonal wire netting machines use gear-driven mechanical drive systems. Gear drive produces consistent output at fixed speeds — adequate for single-specification, moderate-volume production. Servo drive allows variable speed control in real time, responding to wire tension variation and diameter changes without manual intervention. The result is consistent twist geometry across the full weaving width regardless of spool depletion, wire diameter variance, or shift duration — mesh quality does not drift as the shift progresses.
Full Wire Diameter Range on One Machine
At 0.35 mm to 2.2 mm, the CNC model covers every standard commercial hexagonal mesh specification from fine decorative wire through to heavy agricultural fencing gauge. Producers who supply multiple market segments — poultry netting, garden mesh, boundary fencing — run all specifications on one machine without tooling changes between wire diameters.
Consistent Mesh Quality Across Full Shifts
The CNC model’s PLC system monitors production parameters continuously. Wire break detection triggers automatic pause — the line stops, the fault is flagged on the touchscreen, and the operator resolves the issue and restarts without calling for a technician. Production counters log output per shift. Speed adjustments are made via touchscreen without stopping the line. For facilities where finding and retaining experienced mechanical operators is difficult, PLC automation directly reduces that dependency.
Control System Specified to Your Maintenance Infrastructure
PLC brand, servo drives, motors, and sensors are specified at the time of order. If your facility runs Siemens infrastructure, specify Siemens. If Schneider components are more readily available in your region, specify Schneider. Your maintenance team works with familiar components — spare parts are sourced locally, not shipped internationally on a six-week lead time.
Noise Below 75 dB — Relevant for Urban and Regulated Facilities
Mechanical gear-driven machines typically operate above 85 dB. The CNC model’s servo drive reduces operating noise to below 75 dB — within standard industrial noise limits for most jurisdictions without additional acoustic treatment. Relevant for facilities in urban industrial parks or markets with active labor environment regulations.
Production Line Layout and Workshop Requirements
A complete CNC hexagonal wire mesh production line consists of five components:
| Component | Function |
|---|---|
| Spool rack (wire pay-off frame) | Holds wire spools; tension-regulated feed to weaving machine |
| Wire tension device | Straightening rollers maintain consistent feed tension across full weaving width |
| CNC Hexagonal Wire Mesh Machine | Core weaving unit — servo drive, PLC control |
| Mesh cutting machine | Automatic panel cutting to specified roll length |
| Mesh rolling and packaging machine | Finished roll collection, compression, and packaging |
Workshop footprint by weaving width:
| Weaving Width | Recommended Floor Area | Ceiling Height |
|---|---|---|
| 1,000 mm | ~8 m × 6 m | Standard (2 m+) |
| 2,000 mm | ~10 m × 7 m | Standard (2 m+) |
| 3,000 mm | ~12 m × 8 m | Standard (2 m+) |
| 4,200 mm | ~15 m × 9 m | Standard (2 m+) |
Need a layout drawing for your workshop?
Provide your floor dimensions — our engineers will return a project-specific AutoCAD layout within 48 hours.
Packaging, Export Documentation, and Delivery
Every CNC hexagonal wire netting machine is prepared for international freight before leaving our Hebei facility. PLC control panels and servo drive components receive anti-static wrapping and shock-absorbing foam protection in addition to standard wooden crate packing.
